Consumption Rate Type

Rate measurement type for resource consumption of the system.

Data Type: 
Constrained List
Unit of Measure: 
Commercial, Residential, Multifamily
List Options Option Definition Unit of Measure
Daily draw Average daily volume of water drawn by the system. None
Energy cycle draw Resource drawn per average cycle of an appliance, such as washer, dryer, dishwasher, elevator, etc. None
Idle power Electric power consumed while equipment is switched off or in a standby mode. None
Maximum power output Peak power exerted by a system. None
Nameplate input power The nameplate input power is either (a) the input power marked on the nameplate (watts), or (b) where only nameplate input voltage and current ranges are provided, the highest value achieved by multiplying a nameplate input voltage limit and its corresponding current limit (Volt-Amperes). None
Nominal power Amount of power drawn or supplied by a device under standard operating conditions. None
None None None
Not applicable Not applicable None
Other Other None
Parasitic fuel The rate of parasitic fuel consumption by heating equipment. Primarily, this will be composed of the electrical energy used for control and display purposes. None
Rated Equipment rated consumption rate (as opposed to rated power) None
Rated consumption Equipment rated consumption rate (as opposed to rated power) None
Rated power The equipmentÕs rated, maximum-power-point power at standard testing conditions. None
Unknown Unknown None
Water cycle draw Water use of an equipment which depends on its chosen setting. For instance, the estimated per cycle water draw for a dishwasher or washing machine under typical conditions. Units are expressed as the number of gallons of water delivered to the machine during one cycle. None
Watts per lamp Amount of power drawn by a specific lamp. None
Term ID: 5364ae7a-62fd-4354-be50-7989abafb82d